b'The Formula Builder allows you to construct complex, derived results using arithmetic, trigonometric and logarithmic expressions. The Formula Builder is standard in L3 systems and optional for the L2Plus software.This example shows a full graph view of an adhesivetest.Threepeaksareidentified based on the sensitivity of 14.1 after the Lmax (maximum peak).The qualified peaks are highlighted in blue and identified as Lmax1, Lmax2 and Lmax3.oftwareSUsingtheFormulaBuilder,anexpression was created that is an average of the three Lmax values only.The Lavg in this example application does not average all data points, but only the Lmax values.The formula you create is evaluated real-time. Syntax errors are noted by displaying a red line around the formula input box.If the formula is correct, the line is green.The functions and features available using theAutomation Builder Software Optionoptional Automation Builder software are shownMeasurement Capabilities L3 L2 Plusin the table.Use Digital I/OThe Formula Builder is supplied standard on L3Use Analog I/O (requires MMx test frames)systems only.Use Command and Conditional LogicFormula BuilderCreate Basic Expressions using Add, Subtract, Multiple and Divide Std1 Create Mathematical Expressions using Algebraic, Trigonometric andStd1 Logarithmic functionsNotes:(1) The Formula Builder function is supplied standard on L3 systems only.The Formula Builder is included in the optional Automation Builder software for L2 Plus system.Advanced mathematical expressions using algebraic, trigonometric and logarithmic functions are available on L3 and L2 Plus systems only.starrett.com 51'